mele_M9_dmesg_android

<6>[ 0.000000] Booting Linux on physical CPU 0
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.3.0 (hansen@dev21) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #4 SMP PREEMPT Tue Apr 23 15:06:00 CST 2013
<4>[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c53c7d
<4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: sun6i
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 464896
<7>[ 0.000000] free_area_init_node: node 0, pgdat c091e600, node_mem_map e4c00000
<7>[ 0.000000] DMA zone: 576 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 64960 pages, LIFO batch:15
<7>[ 0.000000] Normal zone: 1134 pages used for memmap
<7>[ 0.000000] Normal zone: 68498 pages, LIFO batch:15
<7>[ 0.000000] HighMem zone: 2898 pages used for memmap
<7>[ 0.000000] HighMem zone: 326830 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @e5e0e000 s10176 r8192 d14400 u32768
<7>[ 0.000000] pcpu-alloc: s10176 r8192 d14400 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 460288
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/system init=/init loglevel=5 mac_addr=00:CE:39:B9:A4:9C specialstr=
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 100MB 1716MB = 1816MB total
<5>[ 0.000000] Memory: 1565932k/1565932k available, 531220k reserved, 1318912K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc07d3000 (7980 kB)
<5>[ 0.000000] .init : 0xc07d3000 - 0xc081c7c0 ( 294 kB)
<5>[ 0.000000] .data : 0xc081e000 - 0xc092dba0 (1087 kB)
<5>[ 0.000000] .bss : 0xc092dbc4 - 0xc0aa3350 (1494 kB)
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:160
<4>[ 0.000000] [aw_delay]: It is use use_time_delay function!
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] Architected local timer running at 24.00MHz.
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000434] Calibrating delay loop... 2013.59 BogoMIPS (lpj=10067968)
<6>[ 0.059954] pid_max: default: 32768 minimum: 301
<6>[ 0.060309] Mount-cache hash table entries: 512
<6>[ 0.061031] CPU: Testing write buffer coherency: ok
<6>[ 0.061077] ftrace: allocating 21999 entries in 65 pages
<6>[ 0.102747] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.102826] Setting up static identity map for 0x405c9ed0 - 0x405c9f28
<4>[ 0.213177] CPU1: Booted secondary processor
<6>[ 0.273088] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<4>[ 0.323355] CPU2: Booted secondary processor
<6>[ 0.383235] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<4>[ 0.433524] CPU3: Booted secondary processor
<6>[ 0.493383] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[ 0.493506] Brought up 4 CPUs
<6>[ 0.493520] SMP: Total of 4 processors activated (8054.37 BogoMIPS).
<6>[ 0.494579] devtmpfs: initialized
<4>[ 0.499981] script_init enter!
<4>[ 0.500676] script_init exit!
<6>[ 0.502234] print_constraints: dummy:
<6>[ 0.502811] NET: Registered protocol family 16
<7>[ 0.503028] sunxi_dump_init success
<6>[ 0.503302] script_sysfs_init success
<6>[ 0.508093] gpiochip_add: registered GPIOs 0 to 27 on device: GPA
<6>[ 0.508287] gpiochip_add: registered GPIOs 30 to 37 on device: GPB
<6>[ 0.508482] gpiochip_add: registered GPIOs 40 to 67 on device: GPC
<6>[ 0.508693] gpiochip_add: registered GPIOs 70 to 97 on device: GPD
<6>[ 0.508887] gpiochip_add: registered GPIOs 100 to 116 on device: GPE
<6>[ 0.509091] gpiochip_add: registered GPIOs 119 to 124 on device: GPF
<6>[ 0.509313] gpiochip_add: registered GPIOs 127 to 145 on device: GPG
<6>[ 0.509509] gpiochip_add: registered GPIOs 148 to 178 on device: GPH
<6>[ 0.509713] gpiochip_add: registered GPIOs 181 to 189 on device: GPL
<6>[ 0.509924] gpiochip_add: registered GPIOs 192 to 199 on device: GPM
<6>[ 0.964892] bio: create slab at 0
<7>[ 0.965777] ion_init enter
<4>[ 0.966372] sunxi_ion_probe, line 137, sunxi_ion_device 0xef269340
<4>[ 0.966384] sunxi_ion_probe, line 148, sunxi_ion_device 0x00000001
<6>[ 0.966411] sunxi_ion_probe: adding heap system_contig of type 1 with 0@0
<4>[ 0.966422] sunxi_ion_probe, line 148, sunxi_ion_device 0x00000000
<6>[ 0.966446] sunxi_ion_probe: adding heap system of type 0 with 0@0
<4>[ 0.966456] sunxi_ion_probe, line 148, sunxi_ion_device 0x00000002
<6>[ 0.966503] sunxi_ion_probe: adding heap carveout of type 2 with 54c00000@10000000
<4>[ 0.966515] sunxi_ion_probe, line 148, sunxi_ion_device 0x00000004
<7>[ 0.966526] sunxi_ion_probe, line 151, heap_data->id 0x00000004
<4>[ 0.966555] sunxi_ion_probe, line 161, tiler_heap 0xef3f5d00
<6>[ 0.966579] sunxi_ion_probe: adding heap tilerheap of type 4 with 54c00000@10000000
<5>[ 0.967726] SCSI subsystem initialized
<6>[ 0.968519] usbcore: registered new interface driver usbfs
<6>[ 0.968834] usbcore: registered new interface driver hub
<6>[ 0.969044] usbcore: registered new device driver usb
<6>[ 0.972158] axp_mfd 1-0034: AXP (CHIP ID: 0x17) detected
<4>[ 0.977757] pmu fake power off config type err!
<6>[ 0.978239] print_constraints: axp22_ldo1: 3000 mV
<4>[ 0.978679] suspend_set_state: axp22_ldo2: No configuration
<6>[ 0.978741] print_constraints: axp22_ldo2: 700 <--> 3300 mV at 700 mV
<6>[ 0.979272] print_constraints: axp22_ldo3: 700 <--> 3300 mV at 1800 mV
<6>[ 0.979795] print_constraints: axp22_ldo4: 700 <--> 3300 mV at 3000 mV
<4>[ 0.980192] suspend_set_state: axp22_ldo5: No configuration
<6>[ 0.980251] print_constraints: axp22_ldo5: 700 <--> 3300 mV at 700 mV
<4>[ 0.980639] suspend_set_state: axp22_ldo6: No configuration
<6>[ 0.980699] print_constraints: axp22_ldo6: 700 <--> 3300 mV at 700 mV
<4>[ 0.981082] suspend_set_state: axp22_ldo7: No configuration
<6>[ 0.981142] print_constraints: axp22_ldo7: 700 <--> 3300 mV at 700 mV
<4>[ 0.981551] suspend_set_state: axp22_ldo8: No configuration
<6>[ 0.981610] print_constraints: axp22_ldo8: 700 <--> 3300 mV at 700 mV
<4>[ 0.982011] suspend_set_state: axp22_ldo9: No configuration
<6>[ 0.982069] print_constraints: axp22_ldo9: 700 <--> 3300 mV at 700 mV
<4>[ 0.982463] suspend_set_state: axp22_ldo10: No configuration
<6>[ 0.982523] print_constraints: axp22_ldo10: 700 <--> 3300 mV at 700 mV
<4>[ 0.982919] suspend_set_state: axp22_ldo11: No configuration
<6>[ 0.982979] print_constraints: axp22_ldo11: 700 <--> 3300 mV at 700 mV
<6>[ 0.983533] print_constraints: axp22_ldo12: 700 <--> 1400 mV at 1100 mV
<6>[ 0.984106] print_constraints: axp22_DCDC1: 1600 <--> 3400 mV at 3300 mV
<6>[ 0.984630] print_constraints: axp22_DCDC2: 600 <--> 1540 mV at 1200 mV
<6>[ 0.985145] print_constraints: axp22_DCDC3: 600 <--> 1860 mV at 1260 mV
<6>[ 0.985673] print_constraints: axp22_DCDC4: 600 <--> 1540 mV at 1200 mV
<6>[ 0.986191] print_constraints: axp22_DCDC5: 1000 <--> 2550 mV at 1500 mV
<6>[ 0.986636] print_constraints: axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
<6>[ 0.987077] print_constraints: axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
<6>[ 0.987760] input: axp22-supplyer as /devices/platform/sun6i-i2c.1/i2c-1/1-0034/axp22-supplyer.19/input/input0
<4>[ 0.987774] axp charger not limit now
<4>[ 0.988465] axp battery hardware current direction 1
<4>[ 0.988874] axp battery hardware current direction 1
<4>[ 0.991648] now_rest_vol = 0
<6>[ 0.992174] gpiochip_add: registered GPIOs 202 to 206 on device: axp_pin
<6>[ 0.993104] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.995020] Bluetooth: Core ver 2.16
<6>[ 0.995178] NET: Registered protocol family 31
<6>[ 0.995189] Bluetooth: HCI device and connection manager initialized
<6>[ 0.995206] Bluetooth: HCI socket layer initialized
<6>[ 0.995217] Bluetooth: L2CAP socket layer initialized
<6>[ 0.995253] Bluetooth: SCO socket layer initialized
<6>[ 0.995733] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.996356] Switching to clocksource arch_sys_counter
<5>[ 1.014054] FS-Cache: Loaded
<6>[ 1.014579] CacheFiles: Loaded
<6>[ 1.035149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.035376] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.037721] NET: Registered protocol family 2
<6>[ 1.038009] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 1.038807] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 1.040703] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 1.041631] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 1.041643] TCP reno registered
<6>[ 1.041657] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 1.041696] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 1.042063] NET: Registered protocol family 1
<6>[ 1.042633] RPC: Registered named UNIX socket transport module.
<6>[ 1.042644] RPC: Registered udp transport module.
<6>[ 1.042653] RPC: Registered tcp transport module.
<6>[ 1.042662] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 1.042920] Unpacking initramfs...
<6>[ 1.175514] Freeing initrd memory: 1108K
<6>[ 1.175532] sunxi_reg_init enter
<4>[ 1.176377] [pm]aw_pm_init!
<6>[ 1.176388] standby_mode = 1.
<6>[ 1.176399] cpu0_en = 0.
<6>[ 1.176441] dram_selfresh_en = 1.
<6>[ 1.176450] wakeup src cnt is : 1.
<6>[ 1.176460] cpus need care gpio: mem_para_info.cpus_gpio_wakeup = 0x20.
<4>[ 1.176479] [wifi]: select wifi: rtl8188eu !!
<4>[ 1.176873] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
<4>[ 1.176887] [rtl8188eu]: module power name axp22_aldo1
<4>[ 1.176897] [rtl8188eu]: rtl8188eu module power set by axp.
<4>[ 1.176990] [rtl8188eu]: first time
<4>[ 1.177173] [wifi_pm]: wifi gpio init is OK !!
<4>[ 1.178984] highmem bounce pool size: 64 pages
<6>[ 1.182647] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 1.183104] fuse init (API version 7.18)
<6>[ 1.184219] msgmni has been set to 484
<6>[ 1.185222] io scheduler noop registered
<6>[ 1.185233] io scheduler deadline registered (default)
<4>[ 1.185481] __init axp io
<4>[ 1.185495] there is 1 number for axp io
<4>[ 1.185504] axp name:axp_0
<6>[ 1.186315] [DISP]==disp_module_init==
<6>[ 1.187051] [DISP]==disp_probe call==
<6>[ 1.187065] [DISP]==disp_probe finish==
<6>[ 1.187388] [DISP]==disp_module_init finish==
<6>[ 1.195662] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
<4>[ 1.198249] ttyS0: autoconf (0x0000, 0xf002e000 0x1c28000): type=U6_16550A
<6>[ 1.198277] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a U6_16550A
<6>[ 1.407339] console [ttyS0] enabled
<4>[ 1.408956] ttyS1: autoconf (0x0000, 0xf0030800 0x1c28800): type=U6_16550A
<6>[ 1.415939] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 34) is a U6_16550A
<4>[ 1.417245] sunmm_probe, line 266
<6>[ 1.427257] loop: module loaded
<3>[ 1.427295] sun6i_vibrator_init motor is not used in config
<6>[ 1.432868] sunxi_hw_init: sunxi debug register driver init
<6>[ 1.433734] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.433748] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
<4>[ 1.434060] -----------1--------------
<4>[ 1.438901] eth0: device MAC address 00:ce:39:b9:a4:9c
<4>[ 1.444305] [gmac]: sun6i_gmac platform driver registration completed
<6>[ 1.450741] PPP generic driver version 2.4.2
<6>[ 1.451355] PPP BSD Compression module registered
<6>[ 1.451369] PPP Deflate Compression module registered
<6>[ 1.451981] PPP MPPE Compression module registered
<6>[ 1.452000] NET: Registered protocol family 24
<6>[ 1.452053] PPTP driver version 0.8.5
<6>[ 1.472753] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.472793] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
<6>[ 1.472911] sw-ehci sw-ehci.1: irq 104, io mem 0xf1c1a000
<6>[ 1.486684] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<6>[ 1.487692] hub 1-0:1.0: USB hub found
<6>[ 1.487725] hub 1-0:1.0: 1 port detected
<6>[ 1.508431] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.508464] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
<6>[ 1.508509] sw-ohci sw-ohci.1: irq 105, io mem 0xf1c1a400
<6>[ 1.571269] hub 2-0:1.0: USB hub found
<6>[ 1.571298] hub 2-0:1.0: 1 port detected
<6>[ 1.591981] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.592014] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
<6>[ 1.592100] sw-ehci sw-ehci.2: irq 106, io mem 0xf1c1b000
<6>[ 1.606440] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<6>[ 1.607271] hub 3-0:1.0: USB hub found
<6>[ 1.607298] hub 3-0:1.0: 1 port detected
<6>[ 1.627923] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.627956] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
<6>[ 1.627996] sw-ohci sw-ohci.2: irq 107, io mem 0xf1c1b400
<6>[ 1.691220] hub 4-0:1.0: USB hub found
<6>[ 1.691248] hub 4-0:1.0: 1 port detected
<6>[ 1.691783] Initializing USB Mass Storage driver...
<6>[ 1.692090] usbcore: registered new interface driver usb-storage
<6>[ 1.692104] USB Mass Storage support registered.
<6>[ 1.692299] usbcore: registered new interface driver ums-alauda
<6>[ 1.692476] usbcore: registered new interface driver ums-cypress
<6>[ 1.692655] usbcore: registered new interface driver ums-datafab
<6>[ 1.692848] usbcore: registered new interface driver ums_eneub6250
<6>[ 1.693024] usbcore: registered new interface driver ums-freecom
<6>[ 1.693209] usbcore: registered new interface driver ums-isd200
<6>[ 1.693385] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.693563] usbcore: registered new interface driver ums-karma
<6>[ 1.693741] usbcore: registered new interface driver ums-onetouch
<6>[ 1.693933] usbcore: registered new interface driver ums-realtek
<6>[ 1.694112] usbcore: registered new interface driver ums-sddr09
<6>[ 1.694301] usbcore: registered new interface driver ums-sddr55
<6>[ 1.694479] usbcore: registered new interface driver ums-usbat
<6>[ 1.694876] usbcore: registered new interface driver usbserial
<6>[ 1.694891] usbserial: USB Serial Driver core
<6>[ 1.695050] USB Serial support registered for GSM modem (1-port)
<6>[ 1.806455] usb 1-1: new high-speed USB device number 2 using sw-ehci
<6>[ 1.959130] hub 1-1:1.0: USB hub found
<6>[ 1.959458] hub 1-1:1.0: 4 ports detected
<6>[ 1.962425] usbcore: registered new interface driver option
<6>[ 1.962438] option: v0.7.2:USB Driver for GSM modems
<6>[ 1.966292] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.966308] android_usb gadget: Number of LUNs=3
<6>[ 1.966324] lun0: LUN: removable file: (no medium)
<6>[ 1.966337] lun1: LUN: removable file: (no medium)
<6>[ 1.966351] lun2: LUN: removable file: (no medium)
<6>[ 1.967086] android_usb gadget: android_usb ready
<6>[ 1.987285] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>[ 1.987305] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 5
<6>[ 1.988250] hub 5-0:1.0: USB hub found
<6>[ 1.988280] hub 5-0:1.0: 1 port detected
<6>[ 1.989590] mousedev: PS/2 mouse device common for all mice
<4>[ 1.990336] uinput result 0 , vmouse_init
<6>[ 1.994848] input: vmouse as /devices/virtual/input/input1
<6>[ 1.995645] =====ctp_fetch_sysconfig_para=====.
<3>[ 1.995663] ctp_fetch_sysconfig_para: ctp_unused.
<4>[ 2.000469] ctp_init: ctp_fetch_sysconfig_para err.
<6>[ 2.006170] sun6i-rtc sun6i-rtc: sun6i_rtc_probe tmp_data = 380239881
<6>[ 2.006254] sun6i-rtc sun6i-rtc: sun6i_rtc_gettime
<6>[ 2.006271] sun6i-rtc sun6i-rtc: read time 2013-4-28 10:30:54
<6>[ 2.006885] using rtc device, rtc, for alarms
<6>[ 2.006932] sun6i-rtc sun6i-rtc: rtc core: registered rtc as rtc0
<6>[ 2.007104] Linux video capture interface: v2.00
<4>[ 2.007252] [cedar]: install start!!!
<4>[ 2.011862] [cedar]: install end!!!
<6>[ 2.025655] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[ 2.026229] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.026245] Bluetooth: HCI H4 protocol initialized
<6>[ 2.026257] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.026271] Bluetooth: HCI Realtek H5 protocol initialized
<3>[ 2.026379] target frequency find is 1008000000, entry 34
<3>[ 2.031846] set cpu frequency to 1008MHz ok
<4>[ 2.036397] [mmc]: sw_mci_init
<4>[ 2.039504] [mmc]: MMC host used card: 0x1, boot card: 0x0, io_card 0
<4>[ 2.046971] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.056809] [mmc]: sdc0 Probe: base:0xf003c000 irq:92 sg_cpu:ffdf7000(45c00000) ret 0.
<6>[ 2.067320] usbcore: registered new interface driver usbhid
<6>[ 2.067335] usbhid: USB HID core driver
<6>[ 2.068321] ashmem: initialized
<6>[ 2.068606] logger: created 256K log 'log_main'
<6>[ 2.068904] logger: created 256K log 'log_events'
<6>[ 2.069166] logger: created 256K log 'log_radio'
<6>[ 2.069463] logger: created 256K log 'log_system'
<6>[ 2.070640] input: headset as /devices/virtual/input/input2
<6>[ 2.071965] usbcore: registered new interface driver snd-usb-audio
<6>[ 2.072181] usbcore: registered new interface driver snd-ua101
<6>[ 2.072399] usbcore: registered new interface driver snd-usb-caiaq
<6>[ 2.072603] usbcore: registered new interface driver snd-usb-6fire
<4>[ 2.073697] enter sun6i Audio codec!!!
<6>[ 2.078930] sun6i audio support initialized
<4>[ 2.079121] sun6i Audio codec init end
<6>[ 2.085383] asoc: sndhdmi <-> sun6i-hdmiaudio.0 mapping ok
<6>[ 2.086508] ALSA device list:
<6>[ 2.086522] #0: sun6i-CODEC Audio Codec
<6>[ 2.086534] #1: sndhdmi
<6>[ 2.086773] Netfilter messages via NETLINK v0.30.
<6>[ 2.086895] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 2.087397] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.087429] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 2.087443] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 2.088385] xt_time: kernel timezone is -0000
<6>[ 2.088437] IPv4 over IPv4 tunneling driver
<6>[ 2.089294] GRE over IPv4 demultiplexor driver
<6>[ 2.089309] GRE over IPv4 tunneling driver
<6>[ 2.090292] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.090510] TCP cubic registered
<6>[ 2.090522] Initializing XFRM netlink socket
<6>[ 2.091212] NET: Registered protocol family 10
<6>[ 2.092546] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.092742] IPv6 over IPv4 tunneling driver
<6>[ 2.094635] NET: Registered protocol family 17
<6>[ 2.094676] NET: Registered protocol family 15
<6>[ 2.094817] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.094860] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.094874] Bluetooth: RFCOMM ver 1.11
<6>[ 2.094890] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.094902] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.094917] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.095147] L2TP core driver, V2.0
<6>[ 2.095176] PPPoL2TP kernel driver, V2.0
<6>[ 2.095188] L2TP IP encapsulation support (L2TPv3)
<6>[ 2.095337] L2TP netlink interface
<6>[ 2.095376] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 2.095390] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
<6>[ 2.095424] ThumbEE CPU extension supported.
<4>[ 2.096180] [rfkill]: rfkill set power 0
<4>[ 2.100128] [rfkill]: no bt module matched !!
<6>[ 2.105612] [LCD]==lcd_module_init==
<4>[ 2.117399] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/iep/deu/iep_deu.c,line:458: deu_mode1 not exist.
<4>[ 2.128027] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/iep/drc/iep_drc.c,line:555: lcdgamma4iep for lcd1 not exist.
<6>[ 2.140826] [DISP]==Fb_Init==
<6>[ 2.143600] [LCD]==lcd_module_init finish==
<6>[ 2.143615] [HDMI]==hdmi_module_init==
<6>[ 2.144448] [HDMI]==hdmi_probe call==
<6>[ 2.146658] [DISP]==Fb_Init==
<6>[ 2.167761] [HDMI]==hdmi_probe finish==
<6>[ 2.167950] [HDMI]==hdmi_module_init finish==
<6>[ 2.167964] [TV]==gm7121_module_init finish==
<4>[ 2.168130] regulator_init_complete: axp22_DCDC5: incomplete constraints, leaving on
<4>[ 2.175915] regulator_init_complete: axp22_DCDC4: incomplete constraints, leaving on
<4>[ 2.183784] regulator_init_complete: axp22_DCDC3: incomplete constraints, leaving on
<4>[ 2.191586] regulator_init_complete: axp22_DCDC2: incomplete constraints, leaving on
<4>[ 2.199399] regulator_init_complete: axp22_DCDC1: incomplete constraints, leaving on
<4>[ 2.207196] regulator_init_complete: axp22_ldo12: incomplete constraints, leaving on
<4>[ 2.215230] regulator_init_complete: axp22_ldo4: incomplete constraints, leaving on
<4>[ 2.222940] regulator_init_complete: axp22_ldo3: incomplete constraints, leaving on
<4>[ 2.230694] regulator_init_complete: axp22_ldo1: incomplete constraints, leaving on
<3>[ 2.238453] otg_wakelock_init: No OTG transceiver found
<6>[ 2.243692] sun6i-rtc sun6i-rtc: sun6i_rtc_gettime
<6>[ 2.243709] sun6i-rtc sun6i-rtc: read time 2013-4-28 10:30:54
<6>[ 2.243751] sun6i-rtc sun6i-rtc: setting system clock to 2013-04-28 10:30:54 UTC (1367145054)
<6>[ 2.244476] Freeing init memory: 292K
<6>[ 2.244492] Write protecting the kernel text section c0008000 - c07d3000
<6>[ 2.244683] rodata_test: attempting to write to read-only section:
<6>[ 2.244703] write to read-only section trapped, success
<4>[ 2.250044] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>[ 2.285557] axp battery hardware current direction 1
<4>[ 2.411149] hello:init_nand_libmodule,21
<4>[ 2.415083] hello:init_nand_libmodule,22
<4>[ 2.419036] [NAND]nand init start, nand0_used_flag is 1
<4>[ 2.424261] [NAND] nand IO Merge: 0x2
<4>[ 2.428022] [NAND] nand driver version: 0x2, 0x11 0x20130303 14:00
<4>[ 2.434908] nand type err!
<4>[ 2.437675] Request memory for lsb page table
<4>[ 2.442121] page type: 0
<6>[ 2.457562] nanda:
<6>[ 2.459289] nandb: unknown partition table
<6>[ 2.460887] nandc: unknown partition table
<6>[ 2.462479] nandd: unknown partition table
<4>[ 2.736449] ====codec_resume_events===
<6>[ 2.918202] nande: unknown partition table
<6>[ 2.920308] nandf: unknown partition table
<6>[ 2.921909] nandg: unknown partition table
<6>[ 2.923519] nandh: unknown partition table
<6>[ 2.925114] nandi:
<6>[ 2.926696] nandj: unknown partition table
<6>[ 2.928317] nandk:
<4>[ 2.929057] [NAND]nand init end.
<6>[ 3.015414] EXT4-fs (nandd): barriers disabled
<6>[ 3.017070] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 3.017607] init: to sleep 1 seconds.
<3>[ 4.021360] init: has waken up.
<3>[ 4.024550] init: [william] hdmistatus = 1!
<3>[ 4.029263] init: width = 1280
<3>[ 4.032326] init: height = 720
<3>[ 4.035389] init: s.st_size = 3686400
<6>[ 4.089009] EXT4-fs (nande): barriers disabled
<6>[ 24.264792] EXT4-fs (nande): recovery complete
<6>[ 24.266717] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 24.267003] init: do_umount: /data
<3>[ 24.326836] init: start e2fsck listening...e2fsck->main: e2fsck start...
<4>[ 24.398466] e2fsck->main: argc = 3
<4>[ 24.401879] e2fsck->main: argv[0] = /system/bin/e2fsck
<4>[ 24.407035] e2fsck->main: argv[1] = -y
<4>[ 24.410788] e2fsck->main: argv[2] = /dev/block/nande
<3>[ 24.415867] init: C_IN_START
<3>[ 24.418617] init: path = /dev/block/nandee2fsck->check_if_skip: exit: FSCK_OK
<3>[ 24.432395] init: e2fsck /dev/block/nande ok
<6>[ 24.484200] EXT4-fs (nande): barriers disabled
<6>[ 24.487425] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,noauto_da_alloc
<6>[ 24.495594] EXT4-fs (nandh): barriers disabled
<6>[ 26.018035] EXT4-fs (nandh): recovery complete
<6>[ 26.020008] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 26.020240] init: do_umount: /cache
<3>[ 26.066795] init: start e2fsck listening...e2fsck->main: e2fsck start...
<4>[ 26.077987] e2fsck->main: argc = 3
<4>[ 26.081423] e2fsck->main: argv[0] = /system/bin/e2fsck
<4>[ 26.086579] e2fsck->main: argv[1] = -y
<4>[ 26.090333] e2fsck->main: argv[2] = /dev/block/nandh
<3>[ 26.095426] init: C_IN_START
<3>[ 26.098195] init: path = /dev/block/nandhe2fsck->check_if_skip: exit: FSCK_OK
<3>[ 26.110513] init: e2fsck /dev/block/nandh ok
<6>[ 26.122352] EXT4-fs (nandh): barriers disabled
<6>[ 26.125556] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 26.127060] init: dont need format /dev/block/nandk
<3>[ 26.132988] init: dont need format /dev/block/nandi
<6>[ 26.151505] EXT4-fs (nandj): barriers disabled
<6>[ 26.153246] EXT4-fs (nandj): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 26.153438] init: do_umount: /databk
<4>[ 26.337208] create_regulator: axp22_DCDC2: Failed to create debugfs directory
<7>[ 26.344942] gpu:open gpu power!
<4>[ 26.356572] PVRSRVDriverProbe(377): config sunxi for ion
<4>[ 26.377758] [rfkill]: rfkill set power 1
<4>[ 26.381689] [rfkill]: no bt module matched !!
<6>[ 26.452319] usbcore: registered new interface driver uvcvideo
<6>[ 26.452337] USB Video Class driver (v1.1.0)
<7>[ 26.470000] G2D: drv_g2d_init
<6>[ 26.470211] G2D: Module initialized.major:247
<4>[ 26.477374] *** ctp_used set to 0 !
<4>[ 26.480873] *** if use ctp,please put the sys_config.fex ctp_used set to 1.
<6>[ 26.494149] input: sw-keyboard as /devices/virtual/input/input3
<6>[ 26.501065] input: sun6i-ir as /devices/virtual/input/input4
<4>[ 26.501421] IR Initial OK
<3>[ 26.511093] gsensor_fetch_sysconfig_para: gsensor_unused.
<4>[ 26.516628] BMA250_init: err.
<6>[ 26.589579] usbcore: registered new interface driver asix
<6>[ 26.599473] usbcore: registered new interface driver qf9700
<6>[ 26.609179] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 26.619003] usbcore: registered new interface driver rtl8150
<6>[ 26.628614] usbcore: registered new interface driver cdc_ether
<6>[ 26.659940] asoc: sndspdif <-> sun6i-spdif.0 mapping ok
<4>[ 26.667452] gpio name is PH13, ret = 0
<4>[ 26.671525] gpio name is PH24, ret = 0
<4>[ 26.675721] gpio_init finish with uesd 1!
<3>[ 26.795871] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[ 26.808833] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<3>[ 26.818890] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<4>[ 26.886258] axp battery hardware current direction 1
<3>[ 29.100372] init: untracked pid 1716 exited
<6>[ 32.287949] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>[ 52.653387] axp battery hardware current direction 1
<6>[ 52.741251] vmouse_input_dev_open
<6>[ 53.146148] acc_open
<6>[ 53.146191] acc_release
<4>[ 54.449283] sw_usb_enable_hcd: usbc_num = 2
<4>[ 54.453535] [rtl8188eu]: rtl8188eu module power set by axp.
<4>[ 54.459230] create_regulator: axp22_ldo2: Failed to create debugfs directory
<4>[ 54.466301] [rtl8188eu]: regulator on.
<4>[ 54.470436] [rtl8188eu]: usb wifi power state: on
<3>[ 54.485151] [sw_hci_sun6i]: ERR: not support sw_usb_enable_ehci
<3>[ 54.491203] [sw_hci_sun6i]: ERR: not support sw_usb_enable_ohci
<6>[ 54.498900] usbcore: registered new interface driver rtl8188eu
<6>[ 54.786555] usb 3-1: new high-speed USB device number 2 using sw-ehci
<4>[ 54.971781] bFWReady == _FALSE call reset 8051...
<4>[ 55.471036] ==> rtl8188e_iol_efuse_patch
<6>[ 55.784134] ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>[ 55.920291] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<3>[ 56.964292] init: untracked pid 2796 exited
<4>[ 57.394337] RTL871X: set ssid [Novell] fw_state=0x00000008
<4>[ 57.580420] RTL871X: start auth
<4>[ 57.588163] RTL871X: auth success, start assoc
<4>[ 57.597867] RTL871X: assoc success
<6>[ 57.602117] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 57.602948] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x03, mask:0x00000fff
<4>[ 57.602957] ==> rssi_level:0, rate_bitmap:0x00000ff5
<4>[ 57.605623] RTL871X: send eapol packet
<4>[ 57.846107] RTL871X: send eapol packet
<4>[ 57.922413] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x03, mask:0x00000fff
<4>[ 57.922423] ==> rssi_level:2, rate_bitmap:0x00000ff0
<4>[ 58.099711] RTL871X: send eapol packet
<4>[ 58.340508] RTL871X: send eapol packet
<4>[ 58.628448] RTL871X: send eapol packet
<4>[ 58.876823] RTL871X: send eapol packet
<4>[ 59.188358] RTL871X: send eapol packet
<4>[ 59.429146] RTL871X: send eapol packet
<4>[ 59.659002] RTL871X: send eapol packet
<4>[ 59.907532] RTL871X: send eapol packet
<4>[ 60.151277] RTL871X: send eapol packet
<4>[ 60.395331] RTL871X: send eapol packet
<3>[ 60.561227] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<4>[ 60.635080] RTL871X: send eapol packet
<4>[ 60.655544] RTL871X: send eapol packet
<4>[ 60.659613] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>[ 60.669408] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<6>[ 61.958228] binder: send failed reply for transaction 8864 to 2888:3348
<3>[ 62.776305] binder: release proc 3464, transaction 9363, not freed
<3>[ 63.846611] target frequency find is 900000000, entry 31
<3>[ 63.853060] set cpu frequency to 900MHz ok
<6>[ 64.568836] binder: 2739:3576 transaction failed 29189, size 328-0
<3>[ 65.379494] binder: release proc 3611, transaction 11632, not freed
<3>[ 66.536543] target frequency find is 624000000, entry 21
<3>[ 66.543013] set cpu frequency to 624MHz ok
<7>[ 68.286444] wlan0: no IPv6 routers present
<5>[ 69.288139] CPU1: shutdown
<6>[ 69.288170] [hotplug]: cpu(2) try to kill cpu(1)
<6>[ 69.290193] [hotplug]: cpu1 is killed! .
<6>[ 69.418666] sun6i-rtc sun6i-rtc: set time 2013-4-28 10:32:1
<3>[ 70.590796] binder: release proc 3745, transaction 12613, not freed
<3>[ 72.586609] target frequency find is 1008000000, entry 34
<3>[ 72.594153] set cpu frequency to 1008MHz ok
<3>[ 72.651623] binder: release proc 3823, transaction 13238, not freed
<3>[ 73.671436] binder: release proc 3802, transaction 13647, not freed
<3>[ 75.805384] binder: release proc 3889, transaction 14860, not freed
<3>[ 75.811765] binder: release proc 3889, transaction 14861, not freed
<4>[ 75.949515] CPU1: Booted secondary processor
<6>[ 75.949579] Calibrating delay loop (skipped) already calibrated this CPU
<3>[ 76.065013] binder: release proc 3985, transaction 15363, not freed
<3>[ 77.340268] binder: release proc 4025, transaction 16002, not freed
<6>[ 80.833854] binder: release 4063:4097 transaction 16781 out, still active
<3>[ 82.030746] binder: release proc 4137, transaction 17717, not freed
<3>[ 88.879636] binder: release proc 4183, transaction 18840, not freed
<5>[ 97.067783] CPU1: shutdown
<6>[ 97.067804] [hotplug]: cpu(2) try to kill cpu(1)
<6>[ 97.069819] [hotplug]: cpu1 is killed! .
<3>[ 97.151187] binder: release proc 4241, transaction 20188, not freed
<6>[ 100.230134] binder: 2739:2753 transaction failed 29189, size 212-8
<6>[ 100.230156] binder: send failed reply for transaction 16781, target dead
<3>[ 121.602868] binder: release proc 4444, transaction 25306, not freed
<3>[ 134.812359] binder: release proc 4611, transaction 29334, not freed
<3>[ 136.236539] target frequency find is 900000000, entry 31
<3>[ 136.242941] set cpu frequency to 900MHz ok
<3>[ 138.756603] target frequency find is 600000000, entry 20
<3>[ 138.763099] set cpu frequency to 600MHz ok
<3>[ 139.001536] binder: release proc 4682, transaction 30644, not freed
<3>[ 144.976576] target frequency find is 1008000000, entry 34
<3>[ 144.984165] set cpu frequency to 1008MHz ok
<3>[ 146.106518] target frequency find is 936000000, entry 32
<3>[ 146.112927] set cpu frequency to 936MHz ok
<3>[ 152.864369] binder: release proc 4851, transaction 34718, not freed
<3>[ 153.486543] target frequency find is 864000000, entry 30
<3>[ 153.492988] set cpu frequency to 864MHz ok
<3>[ 156.026528] target frequency find is 672000000, entry 23
<3>[ 156.032971] set cpu frequency to 672MHz ok
<5>[ 161.408374] CPU2: shutdown
<6>[ 161.408406] [hotplug]: cpu(3) try to kill cpu(2)
<6>[ 161.410427] [hotplug]: cpu2 is killed! .
<3>[ 163.776559] target frequency find is 480000000, entry 15
<3>[ 163.783011] set cpu frequency to 480MHz ok
<3>[ 166.186530] target frequency find is 1008000000, entry 34
<3>[ 166.194100] set cpu frequency to 1008MHz ok
<6>[ 173.996839] usb 1-1.3: new low-speed USB device number 3 using sw-ehci
<6>[ 174.133952] input: Logitech USB Optical Mouse as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
<6>[ 174.136132] generic-usb 0003:046D:C05A.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-sw-ehci-1.3/input0
<3>[ 176.135599] init: untracked pid 4963 exited
<6>[ 179.886815] usb 1-1.2: new low-speed USB device number 4 using sw-ehci
<6>[ 180.018641] input: Dell Dell USB Entry Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
<6>[ 180.019931] generic-usb 0003:413C:2107.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-sw-ehci-1.2/input0
<3>[ 182.020128] init: untracked pid 5008 exited
<3>[ 188.696124] binder: release proc 5299, transaction 42004, not freed
<4>[ 188.735849] CPU1: Booted secondary processor
<6>[ 188.735913] Calibrating delay loop (skipped) already calibrated this CPU
<3>[ 205.916505] target frequency find is 828000000, entry 29
<3>[ 205.922985] set cpu frequency to 828MHz ok
<5>[ 209.597932] CPU1: shutdown
<6>[ 209.597959] [hotplug]: cpu(3) try to kill cpu(1)
<6>[ 209.599975] [hotplug]: cpu1 is killed! .
<3>[ 217.476547] target frequency find is 1008000000, entry 34
<3>[ 217.484115] set cpu frequency to 1008MHz ok
<3>[ 221.416553] target frequency find is 900000000, entry 31
<3>[ 221.422969] set cpu frequency to 900MHz ok
<3>[ 224.820347] binder: release proc 5928, transaction 50594, not freed
<3>[ 227.210322] binder: release proc 3909, transaction 51180, not freed
<3>[ 234.416532] target frequency find is 600000000, entry 20
<3>[ 234.422974] set cpu frequency to 600MHz ok
<3>[ 237.766545] target frequency find is 408000000, entry 12
<3>[ 237.773033] set cpu frequency to 408MHz ok
<5>[ 241.668945] CPU3: shutdown
<6>[ 241.668989] [hotplug]: cpu(0) try to kill cpu(3)
<6>[ 241.671014] [hotplug]: cpu3 is killed! .
<3>[ 244.176537] target frequency find is 312000000, entry 8
<3>[ 244.182908] set cpu frequency to 312MHz ok
<3>[ 247.236645] target frequency find is 216000000, entry 4
<3>[ 247.243039] set cpu frequency to 216MHz ok
<3>[ 250.396691] target frequency find is 144000000, entry 1
<3>[ 250.403159] set cpu frequency to 144MHz ok
<3>[ 253.356810] target frequency find is 120000000, entry 0
<3>[ 253.363853] set cpu frequency to 120MHz ok
<3>[ 255.197119] target frequency find is 1008000000, entry 34
<3>[ 255.205180] set cpu frequency to 1008MHz ok
<4>[ 258.861709] CPU1: Booted secondary processor
<6>[ 258.861769] Calibrating delay loop (skipped) already calibrated this CPUCPU2: Booted secondary processor
<6>[ 262.425333] Calibrating delay loop (skipped) already calibrated this CPU
<5>[ 267.972790] CPU1: shutdown
<6>[ 267.972813] [hotplug]: cpu(0) try to kill cpu(1)
<6>[ 267.974826] [hotplug]: cpu1 is killed! .
<3>[ 270.596517] target frequency find is 720000000, entry 25
<3>[ 270.602964] set cpu frequency to 720MHz ok
<3>[ 273.646524] target frequency find is 528000000, entry 17
<3>[ 273.652961] set cpu frequency to 528MHz ok
<3>[ 276.371528] target frequency find is 432000000, entry 13
<3>[ 276.378039] set cpu frequency to 432MHz ok
<3>[ 279.016599] target frequency find is 336000000, entry 9
<3>[ 279.022966] set cpu frequency to 336MHz ok
<3>[ 281.846634] target frequency find is 264000000, entry 6
<3>[ 281.853021] set cpu frequency to 264MHz ok
<3>[ 284.336678] target frequency find is 216000000, entry 4
<3>[ 284.343098] set cpu frequency to 216MHz ok
<3>[ 286.916895] target frequency find is 144000000, entry 1
<3>[ 286.924921] set cpu frequency to 144MHz ok
<5>[ 292.152916] CPU2: shutdown
<6>[ 292.153015] [hotplug]: cpu(0) try to kill cpu(2)
<6>[ 292.155140] [hotplug]: cpu2 is killed! .
<3>[ 294.286847] target frequency find is 1008000000, entry 34
<3>[ 294.294570] set cpu frequency to 1008MHz ok
<4>[ 296.552264] CPU1: Booted secondary processor
<6>[ 296.552325] Calibrating delay loop (skipped) already calibrated this CPU
<3>[ 299.406515] target frequency find is 720000000, entry 25
<3>[ 299.412960] set cpu frequency to 720MHz ok
<5>[ 302.229343] CPU1: shutdown
<6>[ 302.229374] [hotplug]: cpu(0) try to kill cpu(1)
<6>[ 302.230386] [hotplug]: cpu1 is killed! .
<3>[ 304.776535] target frequency find is 528000000, entry 17
<3>[ 304.782963] set cpu frequency to 528MHz ok
<3>[ 307.286529] target frequency find is 432000000, entry 13
<3>[ 307.293165] set cpu frequency to 432MHz ok
<3>[ 308.356627] target frequency find is 1008000000, entry 34
<3>[ 308.367400] set cpu frequency to 1008MHz ok
<3>[ 309.936795] target frequency find is 900000000, entry 31
<3>[ 309.943535] set cpu frequency to 900MHz ok
<3>[ 313.186555] target frequency find is 600000000, entry 20
<3>[ 313.193146] set cpu frequency to 600MHz ok
<3>[ 315.971573] target frequency find is 408000000, entry 12
<3>[ 315.978100] set cpu frequency to 408MHz ok
<3>[ 318.236611] target frequency find is 312000000, entry 8
<3>[ 318.242982] set cpu frequency to 312MHz ok
<3>[ 320.516687] target frequency find is 288000000, entry 7
<3>[ 320.523324] set cpu frequency to 288MHz ok
<3>[ 323.171572] target frequency find is 192000000, entry 3
<3>[ 323.178076] set cpu frequency to 192MHz ok
<3>[ 325.326729] target frequency find is 1008000000, entry 34
<3>[ 325.334377] set cpu frequency to 1008MHz ok
<4>[ 326.398445] CPU1: Booted secondary processor
<6>[ 326.398508] Calibrating delay loop (skipped) already calibrated this CPU
<3>[ 333.416501] target frequency find is 720000000, entry 25
<3>[ 333.422945] set cpu frequency to 720MHz ok
<3>[ 336.796526] target frequency find is 528000000, entry 17
<3>[ 336.802970] set cpu frequency to 528MHz ok
<3>[ 339.576546] target frequency find is 432000000, entry 13
<3>[ 339.583048] set cpu frequency to 432MHz ok
<3>[ 342.596593] target frequency find is 336000000, entry 9
<3>[ 342.602982] set cpu frequency to 336MHz ok
<3>[ 345.436702] target frequency find is 240000000, entry 5
<3>[ 345.443116] set cpu frequency to 240MHz ok
<5>[ 348.080272] CPU1: shutdown
<6>[ 348.080335] [hotplug]: cpu(0) try to kill cpu(1)
<6>[ 348.082400] [hotplug]: cpu1 is killed! .
<3>[ 352.606648] target frequency find is 192000000, entry 3
<3>[ 352.613080] set cpu frequency to 192MHz ok
<3>[ 355.126694] target frequency find is 1008000000, entry 34
<3>[ 355.134343] set cpu frequency to 1008MHz ok
<4>[ 356.284816] CPU1: Booted secondary processor
<6>[ 356.284879] Calibrating delay loop (skipped) already calibrated this CPU
<3>[ 358.996497] target frequency find is 720000000, entry 25
<3>[ 359.002954] set cpu frequency to 720MHz ok
<3>[ 362.056570] target frequency find is 528000000, entry 17
<3>[ 362.062996] set cpu frequency to 528MHz ok
<3>[ 364.871643] target frequency find is 432000000, entry 13
<3>[ 364.878156] set cpu frequency to 432MHz ok
<3>[ 366.396662] target frequency find is 1008000000, entry 34
<3>[ 366.404230] set cpu frequency to 1008MHz ok
<3>[ 367.946533] target frequency find is 828000000, entry 29
<3>[ 367.953010] set cpu frequency to 828MHz ok
<3>[ 370.596510] target frequency find is 648000000, entry 22
<3>[ 370.602982] set cpu frequency to 648MHz ok
<3>[ 373.571607] target frequency find is 456000000, entry 14
<3>[ 373.578144] set cpu frequency to 456MHz ok
<5>[ 378.684343] CPU1: shutdown
<6>[ 378.684382] [hotplug]: cpu(0) try to kill cpu(1)
<6>[ 378.686415] [hotplug]: cpu1 is killed! .
<3>[ 381.296567] target frequency find is 360000000, entry 10
<3>[ 381.303027] set cpu frequency to 360MHz ok
<3>[ 383.746574] target frequency find is 264000000, entry 6
<3>[ 383.753008] set cpu frequency to 264MHz ok
<3>[ 386.856682] target frequency find is 1008000000, entry 34
<3>[ 386.865472] set cpu frequency to 1008MHz ok
<4>[ 388.596740] CPU1: Booted secondary processor
<6>[ 388.596805] Calibrating delay loop (skipped) already calibrated this CPU
<3>[ 390.836483] target frequency find is 720000000, entry 25
<3>[ 390.842943] set cpu frequency to 720MHz ok

2013-04-28 18:36 700